gonghongchuan/commCPU_SUPV
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
commCPU_SUPV/code/eth2lib/inc/wizchip_conf.h
GHC c73df0c40d v4.0初始化
2025-04-30 16:24:29 +08:00

970 lines
45 KiB
C
Raw Permalink Blame History

//* ****************************************************************************
//! \file wizchip_conf.h
//! \brief WIZCHIP Config Header File.
//! \version 1.0.0
//! \date 2019/01/01
//! \par Revision history
//! <2019/01/01> 1st Release
//! \author MidnightCow
//! \copyright
//!
//! Copyright (c) 2019, WIZnet Co., LTD.
//!
//! Permission is hereby granted, free of charge, to any person obtaining a copy
//! of this software and associated documentation files (the "Software"), to deal
//! in the Software without restriction, including without limitation the rights
//! to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
//! copies of the Software, and to permit persons to whom the Software is
//! furnished to do so, subject to the following conditions:
//!
//! The above copyright notice and this permission notice shall be included in
//! all copies or substantial portions of the Software.
//!
//! THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
//! IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
//! FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
//! AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
//! LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
//! OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
//! SOFTWARE.
//!
//*****************************************************************************
#ifndef _WIZCHIP_CONF_H_
#define _WIZCHIP_CONF_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "eth2sys.h"
#ifdef ETH2_OS_LINUX
/**
* @defgroup extra_functions 2. WIZnet Extra Functions
*
* @brief These functions is optional function.
* @details @ref extra_functions could be replaced with @ref WIZCHIP_IO_Functions_W6100, \n
* because they were made by @ref Basic_IO_function_W6100.\n
* These functions configure or indicate @ref _WIZCHIP_, network information, interrupt, PHY, and timer.
*/
#define W6100 6100 ///< W6100 Definition
//Add to
//
#ifndef _WIZCHIP_
/**
* @brief Select WIZCHIP.
* @todo You should select one, \b W6100, etc. \n\n
* ex> <code> #define _WIZCHIP_ W6100 </code>
*
*/
#define _WIZCHIP_ W6100 // W6100
#endif
#define _WIZCHIP_IO_MODE_NONE_ 0x0000
#define _WIZCHIP_IO_MODE_BUS_ 0x0100 ///< Bus interface mode.\n Refer to @ref _WIZCHIP_IO_MODE_BUS_DIR_ or @ref _WIZCHIP_IO_MODE_BUS_INDIR_.
#define _WIZCHIP_IO_MODE_SPI_ 0x0200 ///< SPI interface mode.\n Refer to @ref _WIZCHIP_IO_MODE_SPI_VDM_ or @ref _WIZCHIP_IO_MODE_SPI_FDM_.
//#define _WIZCHIP_IO_MODE_IIC_ 0x0400
//#define _WIZCHIP_IO_MODE_SDIO_ 0x0800
// Add to
//
#define _WIZCHIP_IO_MODE_BUS_DIR_ (_WIZCHIP_IO_MODE_BUS_ + 1) ///< BUS interface mode for direct.\n Refer to @ref _WIZCHIP_IO_MODE_BUS_.
#define _WIZCHIP_IO_MODE_BUS_INDIR_ (_WIZCHIP_IO_MODE_BUS_ + 2) ///< BUS interface mode for indirect.\n Refer to @ref _WIZCHIP_IO_MODE_BUS_.
#define _WIZCHIP_IO_MODE_SPI_VDM_ (_WIZCHIP_IO_MODE_SPI_ + 1) ///< SPI interface mode for variable length data.\n Refer to @ref _WIZCHIP_IO_MODE_SPI_
/**
* @brief SPI interface mode for fixed length data mode.
* @note If you want to use SPI FDM, Feel free to eth2send a email to support@wiznet.io.
* @sa _WIZCHIP_IO_MODE_SPI_
*/
#define _WIZCHIP_IO_MODE_SPI_FDM_ (_WIZCHIP_IO_MODE_SPI_ + 2)
/**
* @brief PHY can be accessed by @ref _PHYCR0_, _PHYCR1_.
* @details It provides hardware access method.
* @note It is smaller s/w footprint than @ref _PHY_IO_MODE_MII_.
* @sa _PHY_IO_MODE_MII_, _PHY_IO_MODE_
* @sa ctlwizchip(), getPHYCR0(), getPHYCR1(), setPHYCR1(), getPHYSR()
*/
#define _PHY_IO_MODE_PHYCR_ 0x0000
/**
* @brief PHY can be accessed by MDC/MDIO signals of MII interface.
* @details It provide software access method.
* @note It is bigger s/w footprint than @ref _PHY_IO_MODE_PHYCR_.
* @sa _PHY_IO_MODE_PHYCR_, _PHY_IO_MODE_
* @sa ctlwizchip(), wiz_read_mdio(), wiz_write_mdio()
*/
#define _PHY_IO_MODE_MII_ 0x0010
/**
* @brief Select PHY Access Mode
* @details @ref _PHY_IO_MODE_ selects PHY access method.
* @todo You should select one of @ref _PHY_IO_MODE_PHYCR_ or @ref _PHY_IO_MODE_MII_.
* @sa ctlwizchip()
*/
#define _PHY_IO_MODE_ _PHY_IO_MODE_PHYCR_ //_PHY_IO_MODE_MII_
#if (_WIZCHIP_ == W6100)
#define _WIZCHIP_ID_ "W6100\0"
/**
* @brief Define @ref _WIZCHIP_ interface mode.
* @todo You should select interface mode of @ref _WIZCHIP_.\n\n
* Select one of @ref _WIZCHIP_IO_MODE_SPI_VDM_, @ref _WIZCHIP_IO_MODE_SPI_FDM_, and @ref _WIZCHIP_IO_MODE_BUS_INDIR_
* @sa WIZCHIP_READ(), WIZCHIP_WRITE(), WIZCHIP_READ_BUF(), WIZCHIP_WRITE_BUF()
*/
//#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_BUS_INDIR_
#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPI_VDM_
//#define _WIZCHIP_IO_MODE_ _WIZCHIP_IO_MODE_SPV_FDM_
typedef uint8_t iodata_t; ///< IO access unit. bus width
typedef int16_t datasize_t; ///< sent or received data size
#include "w6100.h"
#else
#error "Unknown defined _WIZCHIP_. You should define 6100"
#endif
#ifndef _WIZCHIP_IO_MODE_
#error "Undefined _WIZCHIP_IO_MODE_. You should define it !!!"
#endif
/**
* @brief Define I/O base address of @ref _WIZCHIP_.
* @todo If you want to use @ref _WIZCHIP_IO_MODE_BUS_ such as @ref _WIZCHIP_IO_MODE_BUS_DIR_ and @ref _WIZCHIP_IO_MODE_BUS_INDIR_,\n
* You should redefine @ref _WIZCHIP_IO_BASE_ to a free address space of your system.\n
* ex> <code> #define _WIZCHIP_IO_BASE_ 0x00008000 </code> \n\n
* Otherwise, No need to redefine it.
*/
#if _WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_BUS_
#define _WIZCHIP_IO_BASE_ 0x60000000 // for W6100 BUS
#elif _WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_SPI_
#define _WIZCHIP_IO_BASE_ 0x00000000 // for W6100 SPI
#else
#error "You should define _WIZCHIP_IO_BASE_ to fit your system memory map."
#endif
#define _WIZCHIP_SOCK_NUM_ 8 ///< The count of independent SOCKET of @ref _WIZCHIP_
/********************************************************
* WIZCHIP BASIC IF functions for SPI, SDIO, I2C , ETC.
*********************************************************/
/**
* @ingroup DATA_TYPE
* @brief Callback function set for @ref _WIZCHIP_
* @details @ref __WIZCHIP_T__ is a structure type to provide the callback function set \n
* * which is called instead of the default functions \n
* in order to your HOST dependent functions can access to @ref _WIZCHIP_.
* @note If it is not registered, the default function is called.
* @sa WIZCHIP_READ(), WIZCHIP_WRITE(), WIZCHIP_READ_BUF(), WIZCHIP_WRITE_BUF()
* @sa reg_wizchip_cris_cbfunc(), reg_wizchip_cs_cbfunc(), reg_wizchip_bus_cbfunc(), reg_wizchip_spi_cbfunc()
*/
typedef struct __WIZCHIP_T__
{
uint16_t if_mode; ///< HOST Interface Mode
uint8_t id[6]; ///< ID of CHIP such as W6100, and so on.
///< The set of critical section callback function.
struct _CRIS
{
void (*_e_n_t_e_r_) (void); ///< critical section enter
void (*_e_x_i_t_) (void); ///< critical section exit
}CRIS;
///< The set of @ref _WIZCHIP_ select control callback function.
struct _CS
{
void (*_s_e_l_e_c_t_) (void); ///< @ref _WIZCHIP_ selected
void (*_d_e_s_e_l_e_c_t_)(void); ///< @ref _WIZCHIP_ deselected
}CS;
///< The set of interface IO callback function.
union _IF
{
///< The callback function of @ref _WIZCHIP_IO_MODE_BUS_ such as @ref _WIZCHIP_IO_MODE_BUS_DIR_ and @ref _WIZCHIP_IO_MODE_BUS_INDIR_
struct _BUS
{
iodata_t (*_read_data) (uint32_t AddrSel); ///< Read 1 @ref iodata_t from @ref _WIZCHIP_ through BUS
void (*_write_data) (uint32_t AddrSel, iodata_t wb); ///< Write 1 @ref iodata_t to @ref _WIZCHIP_ through BUS
void (*_read_data_buf) (uint32_t AddrSel, iodata_t* pBuf, datasize_t len, uint8_t addrinc); ///< Read @ref iodata_t as many as <i>len</i> from @ref _WIZCHIP_ through BUS
void (*_write_data_buf) (uint32_t AddrSel, iodata_t* pBuf, datasize_t len, uint8_t addrinc); ///< Write @ref iodata_t data as many as <i>len</i> to @ref _WIZCHIP_ through BUS
}BUS;
///< The callback function of @ref _WIZCHIP_IO_MODE_SPI_ such as @ref _WIZCHIP_IO_MODE_SPI_VDM_ and @ref _WIZCHIP_IO_MODE_SPI_FDM_
struct _SPI
{
uint8_t (*_read_byte) (void); ///< Read 1 byte data from @ref _WIZCHIP_ through SPI
void (*_write_byte) (uint8_t wb); ///< Write 1 byte data to @ref _WIZCHIP_ through SPI
void (*_read_byte_buf) (uint8_t* pBuf, datasize_t len); ///< Read byte data as many as <i>len</i> from @ref _WIZCHIP_ through SPI
void (*_write_byte_buf) (uint8_t* pBuf, datasize_t len); ///< Write byte data as many as <i>len</i> to @ref _WIZCHIP_ through SPI
}SPI;
}IF;
}_WIZCHIP_T_;
extern _WIZCHIP_T_ WIZCHIP; ///< @ref WIZCHIP is instance of @ref _WIZCHIP_T_ to access @ref _WIZCHIP_.
/**
* @ingroup DATA_TYPE
* @brief @ref _WIZCHIP_ Control Type Enumeration.
* @details @ref ctlwizchip_type includes a general control function for @ref _WIZCHIP_ and the integrated Ethernet PHY.
* @note If @ref _PHY_IO_MODE_ is @ref _PHY_IO_MODE_PHYCR_,\n
* the PHY control types such as following can configure the integrate PHY thru @ref _PHYCR0_ & @ref _PHYCR1_, or indicate thru or @ref _PHYSR_.\n
* - @ref CW_RESET_PHY : It can configure the PHY only when @ref SYS_PHY_LOCK is unlock.
* - @ref CW_SET_PHYCONF : It can configure the PHY only when @ref SYS_PHY_LOCK is unlock.
* - @ref CW_GET_PHYCONF
* - @ref CW_GET_PHYSTATUS
* - @ref CW_SET_PHYPOWMODE : It can configure the PHY only when @ref SYS_PHY_LOCK is unlock.
* - @ref CW_GET_PHYPOWMODE
* - @ref CW_GET_PHYLINK
* Else if @ref _PHY_IO_MODE_ is @ref _PHY_IO_MODE_MII_, \n
* the PHY control types configure or indicate through two MDC/MDIO signal of MII \n
* regardless of @ref SYS_PHY_LOCK.
* @sa ctlwizchip()
*/
typedef enum
{
CW_SYS_LOCK, ///< Lock or Unlock @ref _WIZCHIP_ with @ref SYS_CHIP_LOCK, @ref SYS_PHY_LOCK, and @ref SYS_NET_LOCK
CW_SYS_UNLOCK, ///< Lock or Unlock @ref _WIZCHIP_ with @ref SYS_CHIP_LOCK, @ref SYS_PHY_LOCK, and @ref SYS_NET_LOCK
CW_GET_SYSLOCK, ///< Get the lock status of @ref _WIZCHIP_ with @ref SYS_CHIP_LOCK, @ref SYS_PHY_LOCK, and @ref SYS_NET_LOCK
CW_RESET_WIZCHIP, ///< Reset @ref _WIZCHIP_ by software
CW_INIT_WIZCHIP, ///< Initialize to SOCKETn buffer size with n byte array typed uint8_t
CW_GET_INTERRUPT, ///< Get the interrupt status with @ref intr_kind
CW_CLR_INTERRUPT, ///< Clear the interrupt with @ref intr_kind
CW_SET_INTRMASK, ///< Set the interrupt mask with @ref intr_kind
CW_GET_INTRMASK, ///< Get the interrupt mask with @ref intr_kind
CW_SET_INTRTIME, ///< Set the interrupt pending time
CW_GET_INTRTIME, ///< Get the interrupt pending time
CW_SET_IEN, ///< Set the global interrupt enable only when @ref SYS_CHIP_LOCK is not set
CW_GET_IEN, ///< Get the global interrupt enable
CW_GET_ID, ///< Get @ref _WIZCHIP_ name.
CW_GET_VER, ///< Get the version of TCP/IP TOE engine
CW_SET_SYSCLK, ///< Set the system clock with @ref SYSCLK_100MHZ or SYSCLK_10MHZ only when @ref SYS_CHIP_LOCK is unlock
CW_GET_SYSCLK, ///< Get the system clock with @ref SYSCLK_100MHZ or SYSCLK_10MHZ
CW_RESET_PHY, ///< Reset PHY
CW_SET_PHYCONF, ///< Set PHY operation mode (Manual/Auto, 10/100, Half/Full) with @ref wiz_PhyConf
CW_GET_PHYCONF, ///< Get PHY operation mode (Manual/Auto, 10/100, Half/Full) with @ref wiz_PhyConf
CW_GET_PHYSTATUS, ///< Get real operation mode with @ref wiz_PhyConf when PHY is linked up.
CW_SET_PHYPOWMODE, ///< Set PHY power mode with @ref PHY_POWER_NORM or PHY_POWER_DOWN
CW_GET_PHYPOWMODE, ///< Get PHY Power mode with @ref PHY_POWER_NORM or PHY_POWER_DOWN
CW_GET_PHYLINK ///< Get PHY Link status with @ref PHY_LINK_ON or @ref PHY_LINK_OFF
}ctlwizchip_type;
/**
* @ingroup DATA_TYPE
* @brief Network control type enumeration
* @details @ref ctlnetwork_type includes a general network configuration function for @ref _WIZCHIP_.
* @sa ctlnetwork().
*/
typedef enum
{
CN_SET_NETINFO, ///< Set Network with @ref wiz_NetInfo
CN_GET_NETINFO, ///< Get Network with @ref wiz_NetInfo
CN_SET_NETMODE, ///< Set network mode with @ref netmode_type
CN_GET_NETMODE, ///< Get network mode with @ref netmode_type
CN_SET_TIMEOUT, ///< Set network timeout with @ref wiz_NetTimeout
CN_GET_TIMEOUT, ///< Get network timeout with @ref wiz_NetTimeout
CN_SET_PREFER, ///< Set the preferred source IPv6 address of @ref _SLCR_.\n Refer to @ref IPV6_ADDR_AUTO, @ref IPV6_ADDR_LLA, @ref IPV6_ADDR_GUA
CN_GET_PREFER, ///< Get the preferred source IPv6 address of @ref _SLCR_.\n Refer to @ref IPV6_ADDR_AUTO, @ref IPV6_ADDR_LLA, @ref IPV6_ADDR_GUA
}ctlnetwork_type;
/**
* @ingroup DATA_TYPE
* @brief Network Service Control Type enumeration
* @details @ref ctlnetservice_type includes network management or monitor functions for @ref _WIZCHIP_.
* @sa ctlnetservice(), wiz_IPAddress, wiz_Prefix
*/
typedef enum
{
CNS_ARP, ///< ARP process with @ref wiz_IPAddress
CNS_PING, ///< PING process with @ref wiz_IPAddress
CNS_DAD, ///< Duplicated IPv6 Address Detection
/**
* @brief Stateless Address Auto-configuration(SLAAC) with @ref wiz_Prefix.
* @details @ref CNS_SLAAC sends first RS message to all-router and then receives RA message from a router.
* @note It is valid only when the first received RA option is the source link-layer address(0x01) and the second is prefix information(0x03).\n
* Refer to @ref SLIR_RS.
* @sa ctlnetservice()
* @sa CNS_GET_PREFIX
*/
CNS_SLAAC,
CNS_UNSOL_NA, ///< Unsolicited Neighbor Advertisement for update @ref _WIZCHIP_ network information to neighbors
/**
* @brief Get prefix information with @ref wiz_Prefix.
* @details @ref CNS_GET_PREFIX can get prefix information of RA message to be sent by a router without RS message.
* @note It is valid only when @ref IK_SOCKL_RA is set and the prefix information(0x03) of RA option is first received.
* @sa ctlnetservice()
* @sa CNS_SLAAC
*/
CNS_GET_PREFIX
}ctlnetservice_type;
/**
* @ingroup DATA_TYPE
* @brief Interrupt Kind
* @details @ref intr_kind can be used as the interrupt bits of @ref _IR_, @ref _SIR_, and @ref _SLIR_,\n
* It can be used as the interrupt mask bits of @ref _IMR_, @ref _SIMR_, and @ref _SLIMR_,\n
* and also, It can be used as the interrupt clear bits of @ref _IRCLR_, @ref _Sn_IRCLR_, and @ref _SLIRCLR_.
* @note It can be used with @b OR operation.
* @sa ctlwizchip(), CW_GET_INTERRUPT, CW_CLR_INTERRUPT, CW_GET_INTRMASK, CW_SET_INTRMASK
* @sa ctlnetservice(), ctlnetservice_type
* @sa wizchip_getinterrupt(), wizchip_clrinterrupt(), wizchip_getinterruptmask(), wizchip_setinterruptmask()
*/
typedef enum
{
IK_PPPOE_TERMINATED = (1 << 0), ///< PPPoE Termination Interrupt
IK_DEST_UNREACH = (1 << 1), ///< ICMPv4 Destination Unreachable Interrupt
IK_IP_CONFLICT = (1 << 2), ///< IPv4 Address Conflict Interrupt
IK_DEST_UNREACH6 = (1 << 4), ///< ICMPv6 Destination Unreachable Interrupt
IK_WOL = (1 << 7), ///< WOL magic packet Interrupt
IK_NET_ALL = (0x97), ///< All Network Interrupt
IK_SOCK_0 = (1 << 8), ///< Socket 0 Interrupt
IK_SOCK_1 = (1 << 9), ///< Socket 1 Interrupt
IK_SOCK_2 = (1 << 10), ///< Socket 2 Interrupt
IK_SOCK_3 = (1 << 11), ///< Socket 3 Interrupt
IK_SOCK_4 = (1 << 12), ///< Socket 4 Interrupt
IK_SOCK_5 = (1 << 13), ///< Socket 5 Interrupt
IK_SOCK_6 = (1 << 14), ///< Socket 6 Interrupt
IK_SOCK_7 = (1 << 15), ///< Socket 7 Interrupt
IK_SOCK_ALL = (0xFF << 8), ///< All Socket Interrupt
IK_SOCKL_TOUT = (1 << 16), ///< @ref _SLCR_ Timeout Interrupt.\n Refer to @ref ctlnetservice_type.
IK_SOCKL_ARP4 = (1 << 17), ///< @ref _SLCR_ APR4 Interrupt.\n Refer to @ref CNS_ARP.
IK_SOCKL_PING4 = (1 << 18), ///< @ref _SLCR_ PING4 Interrupt.\n Refer to @ref CNS_PING.
IK_SOCKL_ARP6 = (1 << 19), ///< @ref _SLCR_ ARP6 Interrupt.\n Refer to @ref CNS_ARP.
IK_SOCKL_PING6 = (1 << 20), ///< @ref _SLCR_ PING6 Interrupt.\n Refer to @ref CNS_PING.
IK_SOCKL_NS = (1 << 21), ///< @ref _SLCR_ NS Interrupt.\n Refer to @ref CNS_DAD.
IK_SOCKL_RS = (1 << 22), ///< @ref _SLCR_ RS Interrupt.\n Refer to @ref CNS_SLAAC.
IK_SOCKL_RA = (1 << 23), ///< @ref _SLCR_ RA Interrupt.\n Refer to @ref CNS_GET_PREFIX.
IK_SOCKL_ALL = (0xFF << 16), ///< @ref _SLCR_ All Interrupt
IK_INT_ALL = (0x00FFFF97) ///< All Interrupt
}intr_kind;
#define SYS_CHIP_LOCK (1<<2) ///< CHIP LOCK. \n Refer to @ref CW_SYS_LOCK, @ref CW_SYS_UNLOCK, and @ref CW_GET_SYSLOCK.
#define SYS_NET_LOCK (1<<1) ///< NETWORK Information LOCK. \n Refer to @ref CW_SYS_LOCK, @ref CW_SYS_UNLOCK, and @ref CW_GET_SYSLOCK.
#define SYS_PHY_LOCK (1<<0) ///< PHY LOCK.\n Refer to @ref CW_SYS_LOCK, @ref CW_SYS_UNLOCK, and @ref CW_GET_SYSLOCK.
#define SYSCLK_100MHZ 0 ///< System Clock 100MHz.\n Refer to Refer to @ref CW_SET_SYSCLK and @ref CW_GET_SYSCLK.
#define SYSCLK_25MHZ 1 ///< System Clock 25MHz.\n Refer to Refer to @ref CW_SET_SYSCLK and @ref CW_GET_SYSCLK.
#define PHY_MODE_MANUAL 0 ///< Configured PHY operation mode with user setting.\n Refer to @ref CW_SET_PHYCONF and @ref CW_GET_PHYCONF.
#define PHY_MODE_AUTONEGO 1 ///< Configured PHY operation mode with auto-negotiation.\n Refer to @ref CW_SET_PHYCONF and @ref CW_GET_PHYCONF.
/**
* @brief Configured PHY operation mode with 10Base-Te.
* @details It can be set or get through @ref ctlwizchip() with @ref CW_SET_PHYCONF or @ref CW_GET_PHYCONF.
* @note It is controlled by @ref _PHYCR1_ regardless of @ref _PHY_IO_MODE_.
* @note After 10Base-Te mode is set, Ethernet PHY should be reset by calling @ref ctlwizchip() with @ref CW_RESET_PHY
*/
#define PHY_MODE_TE 2
#define PHY_SPEED_10 0 ///< PHY Link Speed 10.\n Refer to @ref CW_SET_PHYCONF and @ref CW_GET_PHYCONF.
#define PHY_SPEED_100 1 ///< PHY Link Speed 100.\n Refer to @ref CW_SET_PHYCONF and @ref CW_GET_PHYCONF.
#define PHY_DUPLEX_HALF 0 ///< PHY Link Half-Duplex.\n Refer to @ref CW_SET_PHYCONF and @ref CW_GET_PHYCONF.
#define PHY_DUPLEX_FULL 1 ///< PHY Link Full-Duplex.\n Refer to @ref CW_SET_PHYCONF and @ref CW_GET_PHYCONF.
#define PHY_LINK_OFF 0 ///< PHY Link Off.\n Refer to @ref CW_GET_PHYLINK.
#define PHY_LINK_ON 1 ///< PHY Link On.\n Refer to @ref CW_GET_PHYLINK.
#define PHY_POWER_NORM 0 ///< PHY power normal mode.\n Refer to @ref CW_SET_PHYPOWMODE and @ref CW_GET_PHYPOWMODE
#define PHY_POWER_DOWN 1 ///< PHY power down mode.\n Refer to @ref CW_SET_PHYPOWMODE and @ref CW_GET_PHYPOWMODE
#define IPV6_ADDR_AUTO 0x00 ///< IPv6 Address Type : Auto.\n Refer to @ref CN_SET_PREFER, @ref CN_GET_PREFER.
#define IPV6_ADDR_LLA 0x02 ///< IPv6 Address Type : LLA. \n Refer to @ref CN_SET_PREFER, @ref CN_GET_PREFER, @ref CNS_DAD.
#define IPV6_ADDR_GUA 0x03 ///< IPv6 Address Type : GUA. \n Refer to @ref CN_SET_PREFER, @ref CN_GET_PREFER, @ref CNS_DAD.
/**
* @ingroup DATA_TYPE
* @brief Ethernet PHY operation mode configuration
* @details @ref wiz_PhyConf is a structure type to configure or \n
* indicate the PHY operation mode such as auto-negotiation, speed, and duplex.\n
* @note If @ref _PHY_IO_MODE_ is defined with @ref _PHY_IO_MODE_PHYCR_,\n
* the PHY operation mode is configured by @ref _PHYCR0_ and is indicated by @ref _PHYSR_.\n
* Otherwise, the PHY operation mode is configured or indicated by two MDC/MDIO signal of MII.
* @note In order to apply @ref wiz_PhyConf to the integrated Ethernet PHY, \n
* It needs to reset the PHY by calling @ref ctlwizchip(@ref CW_RESET_PHY)
* @sa ctlwizchip(), CW_SET_PHYCONF, CW_GET_PHYCONF, CW_RESET_PHY
* @sa wizphy_setphyconf(), wizphy_getphyconf(), wizphy_reset()
*/
typedef struct wiz_PhyConf_t
{
uint8_t mode; ///< set by @ref PHY_MODE_MANUAL ,@ref PHY_MODE_AUTONEGO, or @ref PHY_MODE_TE
uint8_t speed; ///< set by @ref PHY_SPEED_10 or @ref PHY_SPEED_100
uint8_t duplex; ///< set by @ref PHY_DUPLEX_HALF @ref PHY_DUPLEX_FULL
}wiz_PhyConf;
/**
* @ingroup DATA_TYPE
* @brief IP Address Configuration Mode
* @details @ref ipconf_mode can be used to save the DHCP mode running on your system.
* @sa ctlnetwork(), CN_SET_NETINFO, CN_GET_NETINFO
* @sa wizchip_setnetinfo(), wizchip_getnetinfo(), wiz_NetInfo
*/
typedef enum
{
NETINFO_NONE = 0x00, ///< No use DHCP
NETINFO_STATIC_V4 = 0x01, ///< Static IPv4 configuration by manually.
NETINFO_STATIC_V6 = 0x02, ///< Static IPv6 configuration by manually.
NETINFO_STATIC_ALL = 0x03, ///< Static IPv4 and IPv6 configuration by manually.
NETINFO_SLAAC_V6 = 0x04, ///< Stateless Adders Auto Configuration for IPv6
NETINFO_DHCP_V4 = 0x10, ///< Dynamic IPv4 configuration from a DHCP sever
NETINFO_DHCP_V6 = 0x20, ///< Dynamic IPv6 configuration from a DHCP sever
NETINFO_DHCP_ALL = 0x30 ///< Dynamic IPv4 and IPv6 configuration from a DHCP sever
}ipconf_mode;
/**
* @ingroup DATA_TYPE
* @brief Network Information for @ref _WIZCHIP_
* @details @ref wiz_NetInfo is a structure type to configure or indicate the network information of @ref _WIZCHIP_.
* @sa ctlnetwork(), CN_SET_NETINFO, CN_GET_NETINFO
* @sa wizchip_setnetinfo(), wizchip_getnetinfo()
*/
typedef struct wiz_NetInfo_t
{
uint8_t mac[6]; ///< Source Hardware Address
uint8_t ip[4]; ///< Source IPv4 Address
uint8_t sn[4]; ///< Subnet Mask value
uint8_t gw[4]; ///< Gateway IPv4 Address
uint8_t lla[16]; ///< Source Link Local Address
uint8_t gua[16]; ///< Source Global Unicast Address
uint8_t sn6[16]; ///< IPv6 Prefix
uint8_t gw6[16]; ///< Gateway IPv6 Address
uint8_t dns[4]; ///< DNS server IPv4 Address
uint8_t dns6[16]; ///< DNS server IPv6 Address
ipconf_mode ipmode; ///< IP Configuration Mode
}wiz_NetInfo;
/**
* @ingroup DATA_TYPE
* @brief Network mode Configuration
* @details @ref netmode_type includes the network mode control function such as ping, TCP/RST block and etc.
* @sa ctlnetwork(), CN_SET_NETMODE, CN_GET_NETMODE
*/
typedef enum
{
// NETMR Bit Values
NM_IPB_V4 = (1 << 0), ///< IPv4 Packet Block
NM_IPB_V6 = (1 << 1), ///< IPv6 Packet Block
NM_WOL = (1 << 2), ///< Wake On Lan(WOL) Mode
NM_PB6_MULTI = (1 << 4), ///< PING6 request from multicasting group address Block
NM_PB6_ALLNODE = (1 << 5), ///< PING6 request from all-node multicasting address Block
NM_MR_MASK = (0x37), ///< @ref _NETMR_ Mask value
// NETMR2 Bit Values
NM_PPPoE = (1 << 8), ///< PPPoE Mode
NM_DHA_SELECT = (1 << 15), ///< Destination Hardware Address Select
NM_MR2_MASK = (0x09<<8), ///< @ref _NETMR2_ Mask value
//NET4MR Bit Values
NM_PB4_ALL = (1 << 16), ///< All PING4 request Block
NM_TRSTB_V4 = (1 << 17), ///< TCP RST packet for IPv4 Send Block
NM_PARP_V4 = (1 << 18), ///< ARP request for IPv4 before PINGv4 Replay
NM_UNRB_V4 = (1 << 19), ///< Unreachable Destination for IPv4 Block
NM_NET4_MASK = (0x0F << 16), ///< @ref _NET4MR_ Mask value
//NET4MR Bit Values
NM_PB6_ALL = (1 << 24), ///< All PING6 request Block
NM_TRSTB_V6 = (1 << 25), ///< TCP RST packet for IPv6 Send Block
NM_PARP_V6 = (1 << 26), ///< ARP request for IPv6 before PINGv4 Replay
NM_UNRB_V6 = (1 << 27), ///< Unreachable Destination for IPv6 Block
NM_NET6_MASK = (0x0F << 24), ///< @ref _NET6MR_ Mask value
NM_MASK_ALL = (0x0F0F0937) ///< @ref netmode_type all mask value
}netmode_type;
/**
* @ingroup DATA_TYPE
* @brief Network Timeout for @ref _WIZCHIP_
* @details @ref wiz_NetInfo is a structure type to configure or indicate the network timeout of @ref _WIZCHIP_.
* @sa ctlnetwork(), CN_SET_TIMEOUT, CN_GET_TIMEOUT
* @sa wizchip_settimeout(), wizchip_gettimeout()
*/
typedef struct wiz_NetTimeout_t
{
uint8_t s_retry_cnt; ///< The default retry count of SOCKETn
uint16_t s_time_100us; ///< The retransmission time of SOCKETn (unit 100us)
uint8_t sl_retry_cnt; ///< The retry count of SOCKET-less
uint16_t sl_time_100us; ///< The retransmission time of SOCKET-less (unit 100us)
}wiz_NetTimeout;
/**
* @ingroup DATA_TYPE
* @brief Destination Information for Network Service of @ref _WIZCHIP_
* @details @ref wiz_NetInfo is a structure type to configure or indicate a destination information of network service.
* @sa ctlnetservice(), CNS_ARP, CNS_PING
* @sa IK_SOCKL_TOUT, IK_SOCKL_ARP4, IK_SOCKL_ARP6, IK_SOCKL_PING4, IK_SOCKL_PING6
*/
typedef struct wiz_IPAddress_t
{
uint8_t ip[16]; ///< Destination IP Address. \n IPv4 index : 0 to 3, IPv6 index : 0 to 15
uint8_t len; ///< Destination IP Address Length.\n IPv4 : 4, IPv6 : 16.
}wiz_IPAddress;
/**
* @ingroup DATA_TYPE
* @brief Prefix Information
* @details @ref wiz_Prefix is a structure type to indicate a prefix information(0x03) of received RA message from a router.
* @sa ctlnetservice(), CNS_SLAAC, IK_SOCKL_RS
* @sa IK_SOCKL_TOUT, IK_SOCKL_RA, CNS_GET_PREFIX
*/
typedef struct wiz_Prefix_t
{
uint8_t len; ///< Prefix Length. \n It is used to set @ref _SUB6R_ to 1 as many as <i>len</i> from LSB bit.
uint8_t flag; ///< Prefix Flag
uint32_t valid_lifetime; ///< Valid Lifetime
uint32_t preferred_lifetime; ///< Preferred Lifetime
uint8_t prefix[16]; ///< Prefix
}wiz_Prefix;
/**
* @ingroup DATA_TYPE
* @brief Destination Information & Destination Hardware Address for @ref CNS_ARP
* @details @ref wiz_ARP is a structure type to set a destination IP address for ARP-request or \n
* indicate a destination hardware address in APR-reply.
* @sa ctlnetservice(), CNS_ARP
* @sa IK_SOCKL_TOUT, IK_SOCKL_ARP4, IK_SOCKL_ARP6
*/
typedef struct wiz_ARP_t
{
wiz_IPAddress destinfo; ///< Destination IP address for ARP-request
uint8_t dha[6]; ///< Destination Hardware Address when ARP-reply is received from the destination.
}wiz_ARP;
/**
* @ingroup DATA_TYPE
* @brief Destination Information & Destination Hardware Address for @ref CNS_ARP
* @details @ref wiz_PING is a structure type to set a ID, sequence number, destination IP address for PING-request.
* @sa ctlnetservice(), CNS_PING
* @sa IK_SOCKL_TOUT, IK_SOCKL_PING4, IK_SOCKL_PING6
*/
typedef struct wiz_PING_t
{
uint16_t id;
uint16_t seq;
wiz_IPAddress destinfo;
}wiz_PING;
/**
* @brief Registers call back functions for critical section.
* @details @ref reg_wizchip_cris_cbfunc() is for basic I/O functions \n
* such as @ref WIZCHIP_READ(), @ref WIZCHIP_WRITE(), @ref WIZCHIP_READ_BUF() and @ref WIZCHIP_WRITE_BUF().
* @param cris_en : callback function for critical section enter.
* @param cris_ex : callback function for critical section exit.
* @todo Register your functions for critical session.
* @note If you do not register it, the @b empty default functions are called.\n
* @ref wizchip_cris_enter(), @ref wizchip_cris_exit()
*/
void reg_wizchip_cris_cbfunc(void(*cris_en)(void), void(*cris_ex)(void));
/**
* @brief Registers call back functions for @ref _WIZCHIP_ select & deselect.
* @details @ref reg_wizchip_cs_cbfunc() registers your functions to select & deselect @ref _WIZCHIP_
* @param cs_sel : callback function to select @ref _WIZCHIP_
* @param cs_desel : callback function to deselect @ref _WIZCHIP_
* @todo Register your functions to select or deselect @ref _WIZCHIP_.
* @note If you do not register it, the @b empty default functions are called. \n
* @ref wizchip_cs_select(), @ref wizchip_cs_deselect()
*/
void reg_wizchip_cs_cbfunc(void(*cs_sel)(void), void(*cs_desel)(void));
/// @cond DOXY_APPLY_CODE
#if (_WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_BUS_)
/// @endcond
/**
* @brief Registers call back functions for BUS interface.
* @details @ref reg_wizchip_bus_cbfunc() is for basic I/O functions \n
* such as @ref WIZCHIP_READ(), @ref WIZCHIP_WRITE(), @ref WIZCHIP_READ_BUF() and @ref WIZCHIP_WRITE_BUF().
* @param bus_rd : callback function to read 1 @ref iodata_t data
* @param bus_wd : callback function to write 1 @ref iodata_t data
* @param bus_rbuf : callback function to read @ref iodata_t data buf as many as <i>len</i>
* @param bus_wbuf : callback function to write @ref iodata_t data buf as many as <i>len</i>
* @todo Register your functions for data read & write through BUS interface.
* @note If you do not register it,the default functions are called. \n
* @ref wizchip_bus_read(), @ref wizchip_bus_write(), @ref wizchip_bus_read_buf(), @ref wizchip_bus_write_buf().
*/
void reg_wizchip_bus_cbfunc(iodata_t (*bus_rd)(uint32_t addr),
void (*bus_wd)(uint32_t addr, iodata_t wb),
void (*bus_rbuf)(uint32_t addr, iodata_t* buf, datasize_t len, uint8_t inc),
void (*bus_wbuf)(uint32_t addr, iodata_t* buf, datasize_t len, uint8_t inc) );
/// @cond DOXY_APPLY_CODE
#endif
/// @endcond
/// @cond DOXY_APPLY_CODE
#if (_WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_SPI_)
/// @endcond
/**
* @brief Registers call back functions for SPI interface.
* @details @ref reg_wizchip_spi_cbfunc() is for for basic I/O functions \n
* * such as @ref WIZCHIP_READ(), @ref WIZCHIP_WRITE(), @ref WIZCHIP_READ_BUF() and @ref WIZCHIP_WRITE_BUF().
* @param spi_rb : callback function to read 1 byte data using SPI
* @param spi_wb : callback function to write 1 byte data using SPI
* @param spi_rbuf : callback function to read byte data buf as many as <i>len</i>
* @param spi_rbuf : callback function to write byte data buf as many as <i>len</i>
* @todo Should register your functions for data read/write through SPI interface.
* @note If you do not register it, the empty default function are called but these function are all null function.\n
* So, You should overwrite them or register your functions for replacing them.\n\n
* The empty default functions are @ref wizchip_spi_read(), @ref wizchip_spi_write(),@ref wizchip_spi_read_buf(), and @ref wizchip_spi_write_buf().
*/
void reg_wizchip_spi_cbfunc(uint8_t (*spi_rb)(void),
void (*spi_wb)(uint8_t wb),
void (*spi_rbuf)(uint8_t* buf, datasize_t len),
void (*spi_wbuf)(uint8_t* buf, datasize_t len) );
/// @cond DOXY_APPLY_CODE
#endif
/// @endcond
/**
* @ingroup extra_functions
* @brief Control @ref _WIZCHIP_.
* @details @ref ctlwizchip() resets @ref _WIZCHIP_ & integrated Ethernet PHY,\n
* configures PHY mode, monitors PHY(Link,Speed,Half/Full/Auto), controls interrupt & mask and so on.
* @param cwtype : Decides to the control type
* @param arg : arg type is dependent on cwtype.
* @return 0 : Success \n
* -1 : Fail because of invalid @ref ctlwizchip_type or unsupported @ref ctlwizchip_type
* @note When you define @ref _PHY_IO_MODE_ to @ref _PHY_IO_MODE_PHYCR_,\n
* If you call @ref ctlwizchip(@ref CW_RESET_PHY), you should wait for stable reset time.\n\n
* ex> W6100 case \n
* <code>
* ctlwizchip(CW_RESET_PHY); \n
* // Need to wait stable reset time 60.3ms\n
* your_delay_function(60300);
* </code>
*/
int8_t ctlwizchip(ctlwizchip_type cwtype, void* arg);
/**
* @ingroup extra_functions
* @brief Controls to network.
* @details @ref ctlnetwork() controls to network environment, mode, timeout and so on.
* @param cntype : Decides to the control type
* @param arg : arg type is dependent on cntype.
* @return -1 : Fail because of invalid @ref ctlnetwork_type or unsupported @ref ctlnetwork_type \n
* 0 : Success
*/
int8_t ctlnetwork(ctlnetwork_type cntype, void* arg);
/**
* @ingroup extra_functions
* @brief Controls to network service.
* @details Controls to network environment, mode, timeout and so on.
* @param cnstype : Decides to the control type
* @param arg : arg type is dependent on cnstype.
* @return -1 : Fail because of invalid @ref ctlnetwork_type or unsupported @ref ctlnetwork_type \n
* 0 : Success
*/
int8_t ctlnetservice(ctlnetservice_type cnstype, void* arg);
/*
* The following functions are implemented for internal use.
* but You can call these functions for code size reduction instead of ctlwizchip() and ctlnetwork().
*/
/**
* @ingroup extra_functions
* @brief Soft Reset @ref _WIZCHIP_.
* @note It backs up the network information before reset, and restores after reset.
* @sa ctlwizchip(), CW_RESET_WIZCHIP
* @sa SYCR0_RST
*/
void wizchip_sw_reset(void);
/**
* @ingroup extra_functions
* @brief Initializes SOCKETn TX/RX buffer size
* @param txsize SOCKETn TX buffer sizes.\n If it is null, SOCKETn TX buffer is initialized as the default size 2KB.
* @param rxsize SOCKETn RX buffer sizes.\n If it is null, SOCKETn RX buffer is initialized as the default size 2KB.
* @return 0 : Success \n
* -1 : Fail. Invalid buffer size
* @sa ctlwizchip(), CW_INIT_WIZCHIP
* @sa _Sn_TX_BSR_, _Sn_RX_BSR_
*/
int8_t wizchip_init(uint8_t* txsize, uint8_t* rxsize);
/**
* @ingroup extra_functions
* @brief Clear Interrupt of @ref _WIZCHIP_.
* @param intr : @ref intr_kind value operated OR. It can type-cast to uint32_t.
* @sa ctlwizchip(), CW_CLR_INTERRUPT, CW_GET_INTERRUPT, CW_SET_INTRMASK, CW_GET_INTRMASK
* @sa wizchip_getintrerupt(), wizchip_setinterruptmask(), wizchip_getinterruptmask()
*/
void wizchip_clrinterrupt(intr_kind intr);
/**
* @ingroup extra_functions
* @brief Get Interrupt of @ref _WIZCHIP_.
* @return @ref intr_kind value operated OR. It can type-cast to uint32_t.
* @sa ctlwizchip(), CW_GET_INTERRUPT, CW_CLR_INTERRUPT, CW_SET_INTRMASK, CW_GET_INTRMASK
* @sa wizchip_clrinterrupt(), wizchip_setinterruptmask(), wizchip_getinterruptmask()
*/
intr_kind wizchip_getinterrupt(void);
/**
* @ingroup extra_functions
* @brief Mask or Unmask Interrupt of @ref _WIZCHIP_.
* @param intr : @ref intr_kind value operated OR. It can type-cast to uint32_t.
* @sa ctlwizchip(), CW_SET_INTRMASK, CW_GET_INTRMASK, CW_CLR_INTERRUPT, CW_GET_INTERRUPT
* @sa wizchip_getinterruptmask(), wizchip_clrinterrupt(), wizchip_getinterrupt()
*/
void wizchip_setinterruptmask(intr_kind intr);
/**
* @ingroup extra_functions
* @brief Get Interrupt mask of @ref _WIZCHIP_.
* @return The operated OR value of @ref intr_kind. It can type-cast to uint32_t.
* @sa ctlwizchip(), CW_GET_INTRMASK, CW_SET_INTRMASK, CW_CLR_INTERRUPT, CW_GET_INTERRUPT
* @sa wizchip_setinterruptmask(), wizchip_clrinterrupt(), wizchip_getinterrupt()
*/
intr_kind wizchip_getinterruptmask(void);
/**
* @ingroup extra_functions
* @brief Get the Link status of integrated PHY.
* @details @ref wizphy_getphylink() gets the link status of the integrated Ethernet PHY \n
* through @ref _PHY_IO_MODE_PHYCR_ or @ref _PHY_IO_MODE_MII_. \n
* @return : @ref PHY_LINK_ON or @ref PHY_LINK_OFF.
* @sa ctlwizchip(), CW_GET_PHYLINK
* @sa _PHY_IO_MODE_
*/
int8_t wizphy_getphylink(void); ///< get the link status of phy in WIZCHIP. No use in W5100
/**
* @ingroup extra_functions
* @brief Reset the integrated PHY.
* @details @ref wizphy_reset() resets the integrated Ethernet PHY \n
* through @ref _PHY_IO_MODE_PHYCR_ or @ref _PHY_IO_MODE_MII_. \n
* @note In @ref _PHY_IO_MODE_PHYCR_, It needs a stable reset time. \n
* So you need to wait for the stable reset time.\n
* The stable reset time for each @ref _WIZCHIP_ maybe different.
* @sa ctlwizchip(), CW_RESET_PHY
* @sa _PHY_IO_MODE_
*/
void wizphy_reset(void); ///< Reset phy. Vailid only in W5500
/**
* @ingroup extra_functions
* @details @ref wizphy_setphyconf() set a operation mode of the integrated Ethernet PHY \n
* through @ref _PHY_IO_MODE_PHYCR_ or @ref _PHY_IO_MODE_MII_.\n
* @param phyconf : @ref wiz_PhyConf
* @note The operation mode can be applied to Ethernet PHY after the Ethernet PHY is reset by @ref wizphy_reset().
* @sa ctlwizchip(), CW_SET_PHYCONF, CW_GET_PHYCONF, CW_GET_PHYSTATUS, CW_RESET_PHY
* @sa _PHY_IO_MODE_, wizphy_getphyconf(), wizphy_getphystatus(), wizphy_reset()
*/
void wizphy_setphyconf(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief Get the integrated Ethernet PHY operation mode.
* @details @ref wizphy_getphyconf() gets a operation mode of the integrated Ethernet PHY \n
* through @ref _PHY_IO_MODE_PHYCR_ or @ref _PHY_IO_MODE_MII_.\n
* @param phyconf : @ref wiz_PhyConf
* @note It gets just the configured value for PHY operation, not real PHY operation.\n
* To get real PHY operation, you can call @ref wizphy_getphystatus()
* @sa ctlwizchip(), CW_GET_PHYCONF, CW_SET_PHYCONF, CW_GET_PHYSTATUS
* @sa _PHY_IO_MODE_, wizphy_setphyconf(), wizphy_getphystatus()
*/
void wizphy_getphyconf(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief Get the real PHY operation status when link is established.
* @details @ref wizphy_getphystatus() gets a operation mode of the integrated Ethernet PHY. \n
* @param phyconf : @ref wiz_PhyConf
* @sa ctlwizchip(), CW_GET_PHYSTATUS, CW_GET_PHYCONF, CW_SET_PHYCONF
* @sa wizphy_setphyconf(), wizphy_getphyconf()
*/
void wizphy_getphystatus(wiz_PhyConf* phyconf);
/**
* @ingroup extra_functions
* @brief Set the power mode of integrated Ethernet PHY.
* @details @ref wizphy_setphypmode() sets a power mode of the integrated Ethernet PHY \n
* through @ref _PHY_IO_MODE_PHYCR_ or @ref _PHY_IO_MODE_MII_.\n
* @param pmode @ref PHY_POWER_NORM or @ref PHY_POWER_DOWN
* @note When the integrated Ethernet PHY enters in power down mode, \n
* the system clock of @ref _WIZCHIP_ is changed to the lowest speed. \n
* So, you should adjust the access time of @ref _WIZCHIP_ to the changed system clock.
* @sa ctlwizchip(), CW_SET_PHYPOWMODE, CW_GET_PHYPOWMODE
* @sa _PHY_IO_MODE_, wizphy_setphypmode(), wizphy_getphypmode()
*/
void wizphy_setphypmode(uint8_t pmode);
/**
* @ingroup extra_functions
* @brief get the power mode of integrated Ethernet PHY.
* @details @ref wizphy_getphypmode() gets a power mode of the integrated Ethernet PHY \n
* through @ref _PHY_IO_MODE_PHYCR_ or @ref _PHY_IO_MODE_MII_.\n
* @return @ref PHY_POWER_NORM or @ref PHY_POWER_DOWN
* @note When the integrated Ethernet PHY enters in power down mode,\n
* the system clock of @ref _WIZCHIP_ is changed to the lowest speed. \n
* So, you should adjust the access time of @ref _WIZCHIP_ to the changed system clock.
* @sa ctlwizchip(), CW_SET_PHYPOWMODE, CW_GET_PHYPOWMODE
* @sa _PHY_IO_MODE_, wizphy_setphypmode(), wizphy_getphypmode()
*/
int8_t wizphy_getphypmode(void);
/**
* @ingroup extra_functions
* @brief Set the network information for @ref _WIZCHIP_
* @param pnetinfo : @ref wiz_NetInfo
* @sa ctlnetwork(), CN_SET_NETINFO, CN_GET_NETINFO
* @sa wizchip_getnetinfo()
*/
void wizchip_setnetinfo(wiz_NetInfo* pnetinfo);
/**
* @ingroup extra_functions
* @brief Get the network information of @ref _WIZCHIP_
* @param pnetinfo : @ref wiz_NetInfo
* @sa ctlnetwork(), CN_GET_NETINFO, CN_SET_NETINFO
* @sa wizchip_setnetinfo()
*/
void wizchip_getnetinfo(wiz_NetInfo* pnetinfo);
/**
* @ingroup extra_functions
* @brief Set the network mode such as WOL, PPPoE, PING Block, and etc.
* @param netmode : @ref netmode_type.
* @sa ctlnetwork(), CN_SET_NETMODE, CN_GET_NETMODE
* @sa wizchip_getnetmode()
*/
void wizchip_setnetmode(netmode_type netmode);
/**
* @ingroup extra_functions
* @brief Get the network mode such as WOL, PPPoE, PING Block, and etc.
* @return @ref netmode_type.
* @sa ctlnetwork(), CN_GET_NETMODE, CN_SET_NETMODE
* @sa wizchip_setnetmode()
*/
netmode_type wizchip_getnetmode(void);
/**
* @ingroup extra_functions
* @brief Set retransmission time values and retry counts.
* @param nettime : @ref wiz_NetTimeout.
* @sa ctlnetwork(), CN_SET_TIMEOUT, CN_GET_TIMEOUT
* @sa wizchip_gettimeout()
*/
void wizchip_settimeout(wiz_NetTimeout* nettime);
/**
* @ingroup extra_functions
* @brief Get retransmission time values and retry counts.
* @param nettime : @ref wiz_NetTimeout.
* @sa ctlnetwork(), CN_GET_TIMEOUT, CN_SET_TIMEOUT
* @sa wizchip_settimeout()
*/
void wizchip_gettimeout(wiz_NetTimeout* nettime);
/**
* @ingroup extra_functions
* @brief ARP process.
* @details @ref wizchip_arp() processes ARP. \n
* It sends the APR-request to destination and waits to receive the ARP-reply.
* @param arp @ref wiz_ARP.\n
* It sets a destination IP address and indicates the destination hardware address.
* @return 0 : success, destination hardware address is valid.\n
* -1 : fail. destination hardware address is invalid because timeout is occurred.\n
* @sa ctlnetservice(), CNS_ARP
*/
int8_t wizchip_arp(wiz_ARP* arp);
/**
* @ingroup extra_functions
* @brief PING process.
* @details @ref wizchip_ping() processes PING. \n
* It sends the PING-request to destination and waits to receive the PING-reply.
* @param ping @ref wiz_PING, It sets a destination IP address, ID, SEQ of PING-request message
* @return 0 : success, PING-reply is successfully received.\n
* -1 : fail. Timeout is occurred.\n
* @sa ctlnetservice(), CNS_PING
*/
int8_t wizchip_ping(wiz_PING* ping);
/**
* @ingroup extra_functions
* @brief DAD(Duplcated Address Detection) process.
* @details @ref wizchip_dad() detects the duplication of source IPv6 address.\n
* It sends a NA message for DAD to all-node multicasting address(FF02::01).
* @param ipv6 : IPv6 address to be detected the duplication.
* @return 0 : success, There is no duplicated address. \n
* -1 : fail. @ref _WIZCHIP_ source IP address to use is duplicated with a neighbor's one.
* @sa ctlnetservice(), CNS_DAD
*/
int8_t wizchip_dad(uint8_t* ipv6);
/**
* @ingroup extra_functions
* @brief Stateless Address Auto Configuration(SLAAC) process.
* @details @ref wizchip_slaac() get a prefix information from a router for SLAAC.\n
* It sends first a RS message to all-router and waits to receive a RS message with prefix information option from a router.
* @param prefix @ref wiz_Prefix
* @return 0 : success, RA message is successfully received, and <i>prefix</i> is valid. \n
* -1 : fail. Timeout is occurred.
* @note It is valid only when the prefix information type(0x03) of RA option received first.\n
* The prefix option should be in the order of prefix length, prefix flag, valid lifetime, default lifetime and prefix address. \n
* For more detail, Refer to @ref SLIR_RS.
* @sa ctlnetservice(), CNS_SLAAC
*/
int8_t wizchip_slaac(wiz_Prefix* prefix);
/**
* @ingroup extra_functions
* @brief Unsolicited NA process.
* @details @ref wizchip_unsolicited() updates the network information of @ref _WIZCHIP_ to neighbors.\n
* It sends a unsolicited NA message with @ref _LLAR_ or @ref _GUAR_ to neighbors \n
* in order to update the network information of @ref _WIZCHIP_.\n
* Because the unsolicited NA message have no reply, timeout is always occurred.
* @return always 0. Timeout is occurred.
* @sa ctlnetservice(), CNS_UNSOL
*/
int8_t wizchip_unsolicited(void);
/**
* @ingroup extra_functions
* @brief Get a prefix information of RA message from a router.
* @details @ref wizchip_getprefix() get a prefix information of RA is periodically sent by a router. \n
* @return 0 : success, a RS message is successfully received from a router.
* -1 : fail, a RS message is not received from a router yet.
* @note It is valid only when the prefix information type(0x03) of RA option received first.\n
* The prefix option should be in the order of prefix length, prefix flag, valid lifetime, default lifetime and prefix address. \n
* For more detail, Refer to @ref SLIR_RS.
* @sa ctlnetservice(), CNS_GET_PREFIX
*/
int8_t wizchip_getprefix(wiz_Prefix * prefix);
#endif
#ifdef __cplusplus
}
#endif
#endif // _WIZCHIP_CONF_H_
Reference in New Issue View Git Blame Copy Permalink