#ifndef IEC104_DEFINE_INCLUDED #define IEC104_DEFINE_INCLUDED //关于位置偏移地址的定义 #define IEC104_OFFSET_LEN 1 #define IEC104_OFFSET_CODE 2 #define IEC104_OFFSET_TI 6 #define IEC104_OFFSET_VSQ 7 #define IEC104_OFFSET_COT 8 #define IEC104_OFFSET_COMADDR 10 // cpu number #define IEC104_OFFSET_ADDR 11 // sub address #define IEC104_OFFSET_INF 12 #define IEC104_OFFSET_CONTEXT 15 #define IEC104_MIN_FRAMELEN 13 // to inf(include it) //下面几个定义，针对客专104协议中，定值相关定义 #define IEC104_OFFSET_DZ_ADDR 15 #define IEC104_OFFSET_DZ_INF 17 #define IEC104_OFFSET_DZ_RII 18 #define IEC104_OFFSET_DZ_NGD 19 //下面几个是第一个条的相关信息 #define IEC104_OFFSET_DZ_GIN_GROUP_1 20 #define IEC104_OFFSET_DZ_GIN_ITEM_1 21 #define IEC104_OFFSET_DZ_GIN_GID_1 26 //下面几个是客专104中，关于录播文件的定义 #define IEC101_OFFSET_NOS 17 //name of section #define IEC101_OFFSET_SEGMENT 18 //关于TI类型的定义 /* Process information in monitor direction */ #define IEC104_TI_M_SP_NA_1 1 // single-point information without time tag #define IEC104_TI_M_SP_TA_1 2 // single-point information with time tag #define IEC104_TI_M_DP_NA_1 3 // double-point information without time tag #define IEC104_TI_M_DP_TA_1 4 // double-point information with time tag #define IEC104_TI_M_ST_NA_1 5 // step position information without time tag #define IEC104_TI_M_ST_TA_1 6 // step position information with time tag #define IEC104_TI_M_BO_NA_1 7 // bistring of 32 bits #define IEC104_TI_M_ME_NA_1 9 // measured value,normalize value #define IEC104_TI_M_ME_TA_1 10 // measured value with time tag #define IEC104_TI_M_ME_NB_1 11 // measured value,scaled #define IEC104_TI_M_ME_NC_1 13 // measured value,short floating point number #define IEC104_TI_M_IT_NA_1 15 // integrated totals #define IEC104_TI_M_IT_TA_1 16 // integrated totals with time tag #define IEC104_TI_M_EP_TA_1 17 // protective or autoclose event report with time tag #define IEC104_TI_M_PS_NA_1 20 // packed single-point information with status change detection #define IEC104_TI_M_ME_ND_1 21 // measured value,normalized value without quality descriptor #define IEC104_TI_M_ME_NE_1 22 #define IEC104_TI_M_SP_TB_1 30 // single-point information with time tag CP56Time2a #define IEC104_TI_M_DP_TB_1 31 // double-point intormation with time tag CP56Time2a #define IEC104_TI_M_ST_TB_1 32 // step position information with time tag CP56Time2a #define IEC104_TI_M_BO_TB_1 33 // bitstring of 32 bit with time tag CP56Time2a #define IEC104_TI_M_ME_TD_1 34 // measured value,normalized value with time tag CP56Time2a #define IEC104_TI_M_ME_TE_1 35 // measured value,scaled value with time tag CP56Time2a #define IEC104_TI_M_ME_TF_1 36 // measured value,short float point number with time tag CP56Time2a #define IEC104_TI_M_IT_TB_1 37 // integrated totals with tag CP56Time2a #define IEC104_TI_M_EP_TD_1 38 // event of protection equipment with time tag CP56Time2a #define IEC104_TI_M_EP_TE_1 39 // packed start events of protection wquipment with time tag CP56Time2a #define IEC104_TI_M_EP_TF_1 40 // packed output circuit information of protection equipment with time tag CP56Time2a //<41..44> // reserved for furthure compatible definitions /* Process information in control direction */ #define IEC104_TI_C_SC_NA_1 45 // single command #define IEC104_TI_C_DC_NA_1 46 // double command #define IEC104_TI_C_RC_NA_1 47 // regulating step command #define IEC104_TI_C_SE_NA_1 48 // set point command,normalized value #define IEC104_TI_C_SE_NB_1 49 // set point command,scaled value #define IEC104_TI_C_SE_NC_1 50 // set point command,short floating-point number #define IEC104_TI_C_BO_NA_1 51 // botstromg of 32 bits //<52..57> // reserved for further compatible definitions #define IEC104_TI_C_SC_TA_1 58 // single command with time tag CP56Time2a #define IEC104_TI_C_DC_TA_1 59 // double command with time tag CP56Time2a #define IEC104_TI_C_RC_TA_1 60 // regulating step command with time tag CP56Time2a #define IEC104_TI_C_SE_TA_1 61 // set point command,normalized value with time tag CP56Time2a #define IEC104_TI_C_SE_TB_1 62 // set point command,scaled value with time tag CPTime2a #define IEC104_TI_C_SE_TC_1 63 // set point command,short floating-point number with time tag CP56Time2a #define IEC104_TI_C_BO_TA_1 64 // bitstring of 32 bits with time tag CP56Time2a //<65..69> // reserved for further compatible definitions /*System information in monitor direction*/ #define IEC104_TI_M_EI_NA_1 70 // end of initialization //<71..99> // reserved for further compatible definitions /*system information in control direction*/ #define IEC104_TI_C_IC_NA_1 100 // interrogation command #define IEC104_TI_C_CI_NA_1 101 // counter interrogation command #define IEC104_TI_C_RD_NA_1 102 // read command #define IEC104_TI_C_CS_NA_1 103 // clock synchronization command #define IEC104_TI_C_RP_NA_1 105 // reset process command #define IEC104_TI_C_TS_TA_1 107 // test command with time tag CP56Time2a //<108..109> // reserved for furter compatible definitions /* Parameter control direction*/ #define IEC104_TI_P_ME_NA_1 110 // parameter of measured value,normalized value #define IEC104_TI_P_ME_NB_1 111 // parameter of measured value,scaled value #define IEC104_TI_P_ME_NC_1 112 // parameter of measured value,short float-point number #define IEC104_TI_P_AC_NA_1 113 // patameter activation //<114..119> // reserved for furter compatible definitions /* file translate*/ #define IEC104_TI_F_FR_NA_1 120 // file ready #define IEC104_TI_F_SR_NA_1 121 // section ready #define IEC104_TI_F_SC_NA_1 122 // call directory,select file, call file,call section #define IEC104_TI_F_LS_NA_1 123 // last section,last segment #define IEC104_TI_F_AF_AN_1 124 // ack file,ack section #define IEC104_TI_F_SG_NA_1 125 // segment #define IEC104_TI_F_DR_TA_1 126 // directory /******ti extend ,begin with xj****/ #define JDXJ104_TI_E_SJ_TA_1 141 // SJ, ZJ report extern #define JDXJ104_TI_E_DZ_NA_1 145 // DZ about #define JDXJ104_TI_E_VER_NA_1 149 //soft version #define JDXJ104_TI_E_SJ_NA_1 150 //sjzj origion #define JDXJ104_TI_E_SJ_NC_1 151 //sjzj call #define JDXJ104_TI_E_GZ_NA_1 152 // gzbg origion #define JDXJ104_TI_E_AT_NA_1 230 // atgc origion //关于传输原因的定义 #define IEC104_COT_M_PN 0x40 #define IEC104_COT_M_cyc 1 #define IEC104_COT_M_scan 2 #define IEC104_COT_M_spont 3 #define IEC104_COT_M_init 4 #define IEC104_COT_M_req 5 #define IEC104_COT_M_act 6 #define IEC104_COT_M_acton 7 #define IEC104_COT_M_deact 8 #define IEC104_COT_M_deactcon 9 #define IEC104_COT_M_actterm 10 #define IEC104_COT_M_retrem 11 #define IEC104_COT_M_retloc 12 #define IEC104_COT_M_file 13 //14 _ 19 #define IEC104_COT_M_introgen 20 #define IEC104_COT_M_intro1 21 #define IEC104_COT_M_intro2 22 #define IEC104_COT_M_intro3 23 #define IEC104_COT_M_intro4 24 //及数量召唤 #define IEC104_COT_M_reqcogen 37 #define IEC104_COT_M_reqco1 38 #define IEC104_COT_M_reqco2 39 #define IEC104_COT_M_reqco3 40 #define IEC104_COT_M_reqco4 41 //错误的传输原因 #define IEC104_COT_M_PN_TI (IEC104_COT_M_PN+44) #define IEC104_COT_M_PN_COT (IEC104_COT_M_PN+45) #define IEC104_COT_M_PN_ADDR (IEC104_COT_M_PN+46) #define IEC104_COT_M_PN_INF (IEC104_COT_M_PN+47) #define IEC104_COT_M_PN_USER1 (IEC104_COT_M_PN+48) #define IEC104_COT_M_PN_USER2 (IEC104_COT_M_PN+49) #endif